Skip to Main Content

Cover Story

August 11, 2008
Volume 86, Number 32
p. 18

Pollutants

What's In The Rivers?

Cheryl Hogue

The Tittabawasee and Saginaw Rivers are tainted with a variety of persistent, chlorinated toxic substances, according to the Michigan Department of Environmental Quality (DEQ). Much of the contamination consists of furans and dioxins released for decades by Dow Chemical's sprawling plant at its Midland, Mich., headquarters.

The mix of contaminants in the rivers can vary depending on where they are found, for instance in the riverbed sediment or floodplain soils versus in animal tissue, DEQ toxicologist Deborah MacKenzie-Taylor says. In addition, the balance of pollutants in soils and sediments or in animal tissue can vary with the location along the rivers.

Nonetheless, the pollution in the rivers shows what regulators call a chemical "fingerprint" that can be traced back to Dow's plant. In soils or sediments that are highly polluted, four chemicals predominate in the area, according to MacKenzie-Taylor and Dow:

Of these, 2,3,4,7,8-pentachlorodibenzofuran and 2,3,7,8-tetrachlorodibenzofuran make up about three-quarters of the pollution.

The four furans are thought to have originated from a type of chlor-alkali production Dow used from the mid- 1890s through the mid-1970s, MacKenzie-Taylor says. Additional dioxins or furans likely came from the manufacture of various chemicals at the Dow plant. These chemicals include chlorobenzenes, chlorophenols (such as pentachlorophenol) and herbicides such as 2,4,5-T (2,4,5-trichlorophenoxyacetic acid), Silvex [2-(2,4,5-trichlorophenoxy)propanoic acid] and 2,4-dichlorophenoxyacetic acid, which was a component of the defoliant agent orange used during the Vietnam War.

Regulators compare the toxicity of furans and dioxins to 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD), the most hazardous member of the family of chlorinated dioxins and furans. When examining a sample of pollution, regulators consider which congeners are present and the relative amount of each substance. They then calculate how much TCDD would pose the same hazard as the compounds in the sample, even if no TCDD is present.

Thus, when an agency says a sample has dioxins and furans at, for example, 1,000 ppt, it means that all pollutants present in the sample together have a toxicity equal to TCDD at 1,000 ppt.

According to the World Health Organization, 2,3,4,7,8-pentachlorodibenzofuran is equivalent to 30% of TCDD's toxicity. Meanwhile, 2,3,7,8-tetrachlorodibenzofuran and 1,2,3,4,7,8-hexachlorodibenzofuran each has toxicity that is a tenth that of TCDD, according to WHO. And 1,2,3,7,8-pentachlorodibenzofuran has a toxicity that is 3% of TCDD's.

Cover Story

Save/Share »

Chemical & Engineering News
ISSN 0009-2347
Copyright © 2009 American Chemical Society

Cover Story

Tools

Save/Share »

Related Stories

Login

Note

Our log-in process has changed. You need an ACS ID to access member-only content.


Username:

Password:

Questions or Problems?

Adjust text size:

A- A+

Articles By Topic