Skip to Main Content

Latest News

February 25, 2008
Volume 86, Number 08
p. 6


Measuring Atomic Friction

Advances in atomic force microscopy allow scientists to measure single-atom forces on a surface

Elizabeth K. Wilson


Atomic Force

This animation shows an atomic force microscope tip measuring the force needed to move a cobalt atom on a crystalline surface.

Video courtesy of Jenny Hunter, IBM

Launch Video

* Macromedia Flash Player 8 is required to view gallery.

FOR THE FIRST TIME, scientists have determined the forces needed to move a single atom across a surface. With this advance, it's now possible to quantify friction at the atomic level. Knowing how tightly an atom or a molecule "sticks" to a surface will be invaluable in nanoelectronics design and in bioengineering.

Drag and drop An AFM tip (red) measures the force it takes to move a cobalt atom (yellow) over a crystalline surface.

Using a modified atomic force microscope at ultrahigh vacuum and temperatures of only 5 K, a team of physicists measured both the lateral and vertical forces exerted on a cobalt atom or carbon monoxide molecule as the microscope tip dragged these diminutive particles along a platinum or copper surface (Science 2008, 319, 1066). The team included Andreas J. Heinrich and Markus Ternes at IBM's Almaden Research Center, in San Jose, Calif.; physics professor Franz Giessibl at the University of Regensburg, Germany; and their colleagues.

In 1990, the same IBM group, led by physicist Donald M. Eigler, first used a scanning tunneling microscope tip to spell "IBM" in xenon atoms on a nickel surface. Since then, numerous groups have succeeded in manipulating surface atoms. But measuring the forces involved has been difficult.

Being able to not only control microscope tip movement but also measure the forces associated with that movement is something "we all dreamed about," says Ludwig Bartels, chemistry professor at the University of California, Riverside. Bartels' studies have included coaxing atoms and molecules to "walk" and react on surfaces with a scanning tunneling microscope tip. "It is a milestone in understanding the mechanical behavior of matter at the single-atom scale," he says.

Scanning tunneling microscopy (STM) has the advantage of being able to move and resolve single atoms, but it doesn't impart information about the forces involved. So the IBM group turned to atomic force microscopy (AFM), a cousin of STM that senses surface atoms through a vibrating cantilever. The cantilever moves in response to forces between a single atom on its tip and the object it's scanning. Only recently has AFM achieved resolution at the atomic level.

Arrows indicate the forces acting on an AFM tip as it moves a cobalt atom over a copper surface.

Materials scientists who made such resolution possible for AFM include Oscar Custance at Japan's National Institute for Materials Science in Tsukuba, and Seizo Morita at Osaka University. In a perspective in Science accompanying the IBM report, these researchers note the new work "opens a new dimension in nanoscience that will bring exciting discoveries and technological achievements."

In addition to the proof-of-principle results, Heinrich's group noted some unexpected properties in different systems. For example, platinum appears to be a much "stickier" surface than copper, at least for cobalt. It requires 210 piconewtons of lateral force to move a cobalt atom on a platinum surface. In contrast, only 17 pN of force are needed to slide cobalt across a copper surface; that's comparable to the torque exerted by a bacterium's flagellar motor.

The group was also surprised to find that cobalt requires an order of magnitude greater lateral force to be dragged across a copper surface than a carbon monoxide molecule, even though both are relatively easy to move by STM.

Another curious effect, still unexplained, is that in the case of a metal atom on a metal surface, the lateral force appears to be independent of the vertical, or "loading," force: Even when the vertical force that attracts the atom to the microscope tip is increased, the lateral force needed to move the atom stays the same.

The force-measuring method can be applied to any molecule and to any surface, Heinrich says. "We want to get the message out—for others to pick up the ball and run with it."

Atomic Force

This animation shows an atomic force microscope tip measuring the force needed to move a cobalt atom on a crystalline surface.

Video courtesy of Jenny Hunter, IBM

Save/Share »

Chemical & Engineering News
ISSN 0009-2347
Copyright © 2009 American Chemical Society


Save/Share »



Our log-in process has changed. You need an ACS ID to access member-only content.



Questions or Problems?

Adjust text size:

A- A+

Articles By Topic