Skip to Main Content

Latest News

June 2, 2008
Volume 86, Number 22
p. 12

Materials Science

Tailor-Made Crystals

Structure-directing synthesis increases fraction of reactive facets

Mitch Jacoby

SCIENTISTS IN AUSTRALIA have developed a method that allows them to engineer crystals with an unusually large fraction of reactive facets. The research team demonstrated that crystals of the anatase form of titanium dioxide can be manipulated in a way that decreases the population of nonreactive facets that tend to dominate the surface and increases the population of reactive facets that ordinarily are scarce (Nature 2008, 453, 638).

Chenghua Sun/Australian Inst. Bioengineering & Nanotechnology (Both)
A new chemical method guides micrometer-sized TiO2 crystals to expose a large fraction of reactive (001) facets versus nonreactive (101) facets.

Crystals with structures and other properties that are custom designed can serve as model systems to probe surface phenomena, including reaction mechanisms. Exploring these tailor-made solids and the methods to prepare them could also lead to advances in applications such as catalysis and photovoltaics.

Not only do the various facets of a crystal look similar to the naked eye, they also resemble one another at the microscopic level. In terms of composition, for example, no matter how a diamond or other crystal is cut, all of its faces are made of the same elements. Yet despite those similarities, subtle differences in the geometric arrangement of the atoms in one crystal face relative to another can lead to large differences in the chemical, electronic, and other properties of those two faces.

Surface scientists have known for years that those differences render certain faces of a given crystal catalytically active while other faces of the same crystal are largely inactive. The so-called (101) crystal faces of anatase TiO2, for example, are thermodynamically stable, highly abundant (typically around 95% of the crystal surface), and largely nonreactive. In contrast, the less stable minority (001) faces readily catalyze a water-splitting reaction.

In the past, researchers tried various ways to direct crystal growth to favor specific facets. Those efforts have been only partially successful. Now, Huagui Yang, Chenghua Sun, and Gaoqing (Max) Lu of the Autralian Institute of Bioengineering & Nanotechnology at the University of Queensland and coworkers have synthesized high-purity anatase TiO2 crystals with nearly 50% (001) facets.

About-Face TiO2's (001) facets are reactive because most Ti atoms (gray) on that surface are unsaturated and have a pentacoordinated bonding configuration (O is red). View Enlarged Image
About-Face TiO2's (001) facets are reactive because most Ti atoms (gray) on that surface are unsaturated and have a pentacoordinated bonding configuration (O is red).

On the basis of theoretical calculations that evaluated the effects of 12 types of adsorbates on surface energy and crystal growth, the team determined that the presence of fluorine on the crystal faces would increase the fraction of (001) facets. Accordingly, the group developed a synthesis based on TiF4 and hydrofluoric acid that yields the (001)-facet-enriched crystals. They also devised a heat treatment that subsequently drives off fluorine and leaves pristine TiO2 crystals.

The study is "convincing and compelling, with solid experimental evidence and theoretical underpinnings," says Scott A. Chambers of Pacific Northwest National Laboratory. He adds that if the new synthesis can be applied widely, then applications in catalysis and other areas "are very real possibilities."

Tulane University physics professor Ulrike Diebold remarks that the study provides an important step between experiments on nanomaterials, which are used in photocatalysis and dye-sensitized solar cells, and surface science experiments on macroscopic crystals. "I can imagine that this concept will find wide use, not only for TiO2, but for other metal oxides as well," she says.

Chemical & Engineering News
ISSN 0009-2347
Copyright © 2011 American Chemical Society