[an error occurred while processing this directive]
Skip to Main Content

Cover Story

December 20, 2010
Volume 88, Number 51
p. 18

Fluoropolymer Processing Breakthrough

Stephen K. Ritter

Courtesy of Theo Tervoort
A device used in high-voltage applications (third from left) was previously machine-sculpted from a PTFE cylinder (left), resulting in a mound of leftover polymer (shown between them). The same device (second from right) produced by injection molding results in no waste—the Moldflon PTFE needed to make the device is shown (right).
  • Print this article
  • Email the editor
Courtesy of Theo Tervoort
Precision Molding An injection-molded bearing (left) and nozzle (right) were made from Moldflon PTFE compounds.

Text Size A A

Poly(tetrafluoroethylene), or PTFE, best known for its use in DuPont's Teflon brand of products, has been around for 70 years. But it was only 10 years ago that Paul Smith, Theo Tervoort, and coworkers at the Swiss Federal Institute of Technology, Zurich, applied simple physical chemistry to solve a problem in PTFE processing. The team identified a narrow window of fluoropolymer viscosities that permits conventional polymer melt-processing extrusion methods to be used to make a wide range of molded PTFE products and spun fibers.

PTFE is a mechanically tough polymer with unique chemical-, thermal-, and mechanical-resistance properties. Since its invention in 1938, conventional and textbook wisdom has been that PTFE, unlike most other commercial plastics, couldn't be melt-processed because of the high viscosity of its molten state. It was thought that complex shapes such as machine parts could only be made by powder compaction, sintering, and subsequent sculpting of polymer blocks, or by adding a copolymer and fillers to allow melt processing, which is costly and diminishes PTFE's beneficial properties.

"We believe that our findings will cause a paradigm shift in fluoropolymer processing," Smith said 10 years ago. The researchers started a company, called Omlidon Technologies, based in Wilmington, Del., to develop the technology and license it to others.

The researchers moved ahead cautiously—and with good reason. "Much of the chemical industry feels that it got burned by early investments in advanced materials, and therefore many have elected not to pursue research on novel materials," Smith and Tervoort noted in 2000.

"We did not realize at the time how accurate our statement was," Tervoort now tells C&EN. "To our disappointment, no raw materials producer initially had the courage to step in to commercialize the technology," he says.

But in 2004, ElringKlinger Kunststofftechnik, one of the largest German-based fluoropolymer converters, was experiencing problems in fluoropolymer processing and realized the potential of the melt-processing development. Smith, Tervoort, and their team signed a licensing agreement, and since then "the company has been working hard to introduce this material to the market under the trade name Moldflon," Tervoort says.

Many of the anticipated applications, such as injection-molded PTFE bearings, films, tubings, fibers, and complex parts for the chemical- and food-processing industries and automotive applications—pieces that can't be machined—are now commercially available or at the end of their developmental stage, Tervoort says.

Chemical & Engineering News
ISSN 0009-2347
Copyright © 2011 American Chemical Society
  • Print this article
  • Email the editor

Services & Tools

ACS Resources

ACS is the leading employment source for recruiting scientific professionals. ACS Careers and C&EN Classifieds provide employers direct access to scientific talent both in print and online. Jobseekers | Employers

» Join ACS

Join more than 161,000 professionals in the chemical sciences world-wide, as a member of the American Chemical Society.
» Join Now!