[an error occurred while processing this directive]
Skip to Main Content

Latest News

November 17, 2008
Volume 86, Number 46
p. 9


Scrutinizing Catalysts

New methods reveal details hidden by conventional analyses

Mitch Jacoby

Color Coded These nanoscale X-ray imagesreveal the way iron (initially as Fe2O3, top) evolves (middle) as it catalyzes production of hydrocarbons (bottom). Bert Weckhuysen/Utrecht U
Color Coded These nanoscale X-ray imagesreveal the way iron (initially as Fe2O3, top) evolves (middle) as it catalyzes production of hydrocarbons (bottom).

TWO NEW METHODS for probing solid catalysts are revealing chemical and physical details typically inaccessible to conventional analytical techniques. The information they yield provides insights into how particles' surfaces change while they mediate chemical reactions and uncovers key differences between seemingly identical catalyst particles. Such information could be used to design new catalysts with improved efficiency, durability, and product selectivity.

A team led by Frank M. F. de Groot and Bert M. Weckhuysen of Utrecht University, in the Netherlands, devised an analytical procedure based on scanning transmission X-ray microscopy. The team used the technique to identify numerous chemical species on the surface of an iron Fischer-Tropsch catalyst and to prepare chemical maps that pinpoint the species' locations with 15-nm resolution (Nature 2008, 456, 222). Fischer-Tropsch chemistry is a surface polymerization used commercially to make fuels from a mixture of CO and hydrogen derived from natural gas or coal.

The X-ray system includes a microreactor that operates at atmospheric pressure and temperatures up to 350 ºC. The device probes catalyst surfaces not only before and after reactions, as in conventional analyses, but also in situ, that is, during reactions, as short-lived species are formed on the surfaces.

The group observed that before the iron in the catalyst is exposed to the reactive gases, the metal, which is supported on SiO2, is present mainly in the α-Fe2O3 form. Not long after the reaction starts, Fe2O3 gives way to various species including Fe3O4, Fe2SiO4, metallic iron, and iron carbide. In addition, the surface becomes coated with hydrocarbon Fischer-Tropsch products.

Compared with transmission-electron and scanning-probe microscopies, the X-ray method has lower spatial resolution. Yet it provides greater chemical detail and is compatible with higher pressures of reactive gases. In contrast, optical microscopy and infrared spectroscopy can reveal chemical detail but generally with lower spatial resolution.

Meanwhile, Peng Chen and coworkers at Cornell University have developed a procedure for using fluorescence microscopy to monitor individual gold nanoparticles as they catalyze reactions one molecule at a time. Specifically, the group probed the solution-phase catalytic reduction of resazurin molecules to resorufin by measuring the fluorescent light bursts that mark each catalytic event (Nat. Mater., DOI: 10.1038/nmat2319).

Using the single-particle/single-molecule method, the team made several observations that would have been hidden by conventional methods, which measure averaged values. For example, they determined that despite the gold nanoparticles' uniform size and composition, the particles exhibit key differences in selectivity and widely varying catalytic activity levels, which fluctuate in a time-dependent way as a result of surface restructuring.

"These are both very impressive studies," says Texas A&M University chemistry professor D. Wayne Goodman. State-of-the-art techniques such as these can be used to address an inventory of long-standing problems in catalysis, he says.

Save/Share »

Chemical & Engineering News
ISSN 0009-2347
Copyright © 2009 American Chemical Society

Related Stories


Save/Share »



Our log-in process has changed. You need an ACS ID to access member-only content.



Questions or Problems?

Adjust text size:

A- A+

Articles By Topic