May 4, 2009

Volume 87, Number 18

p. 11

Polymer Science

Photonic Polyethylene

Unique block copolymers yield colorful, low-cost materials for many applications

Steve Ritter

Dow Chemical (Both)

Dow Chemical's diblock copolymers self-assemble into two-phase transparent films that scatter visible light, resulting in an iridescent blue-green hue in the thin-film example shown.

DOW CHEMICAL scientists have used their unique "chain-shuttling" polymerization technique to make polyethylene block copolymers that can self-assemble into materials with ordered phases that give rise to colorful optical properties (Macromolecules, DOI: 10.1021/ma9002819). Compared with colloidal crystals and other photonic materials, these photonic polyethylenes could become a low-cost staple polymer for a new range of applications, including energy-efficient building materials that reflect sunlight.

In 2006, a Dow Chemical team identified a pair of catalysts that work in combination to build polyethylene block copolymers from ethylene and 1-octene (C&EN, May 8, 2006, page 9). The process takes advantage of diethylzinc as a transfer reagent to shuttle the growing polymer chains back and forth between the catalysts in a continuous reaction that adds alternating blocks of ethylene and 1-octene with precise control over polymer composition.

Now, Phillip D. Hustad, Jeffrey D. Weinhold, Gary R. Marchand, Eddy I. Garcia-Meitin, and Patricia L. Roberts at the company's Freeport, Texas, site have modified the technique to make polydisperse polyethylene diblock copolymers with a distribution of block lengths. When melted and compressed into films, the distinct polymeric segments self-assemble into a layered pattern of "hard" semicrystalline and "soft" amorphous phases, Hustad explains. Each phase has a different refractive index, which enables the polymer films to function as photonic crystals and scatter visible light.

Block copolymers have been used to form photonic crystals in the past, Hustad says, but achieving structural features large enough to interact with visible light has proven difficult. Such materials have only been prepared by using very high molecular weight copolymers, typically up to 1 million g/mol, and maintaining uniform (monodisperse) polymer chain lengths, which requires solution processing that adds complexity and cost.

The Dow Chemical polydisperse polyolefin diblock copolymers achieve the same effects with an order of magnitude lower molecular weight and without solvent processing. In addition, the semicrystalline nature of the new materials allows them to be reversibly switched from reflective to nonreflective states by heating and cooling.

Polymer chemist Marc A. Hillmyer of the University of Minnesota, Twin Cities, says the Dow Chemical approach allows the synthesis of polymers that "simply cannot be prepared by conventional methods." The research is "a nice example of how increased polydispersity can actually be beneficial and lead to new phenomena in certain block copolymer systems," Hillmyer notes.

MIT physicist Edwin L. Thomas, an expert in photonic polymers, adds that the Dow Chemical approach "presents a real opportunity to implement photonic polymers for many low-cost applications."

Chemical & Engineering News

ISSN 0009-2347

Copyright © 2009 American Chemical Society