[an error occurred while processing this directive]
Skip to Main Content

Science & Technology

May 9, 2011
Volume 89, Number 19
pp. 40-41

Saving Space Suits

Conservators try to stop the degradation of NASA’s outer space outfits

Sarah Everts

  • Print this article
  • Email the editor

Text Size A A


Mark Avino (both)
Worlds apart Space suits changed dramatically as designers raced to improve their performance. Alan Shepard wore the aluminum-coated space suit (top) when he went into space on Mercury’s Freedom 7 mission but was dressed in the white outfit for his walk (and golf game) on the moon during the Apollo 14 landing.

You might be tempted to think that the space suits that protected early human astronauts from the extreme temperatures and radiation of outer space might be resilient in the comparatively benign environment back on Earth.


Not so. The suits from the National Aeronautics & Space Administration’s race to the moon in the 1960s and ’70s certainly did their duty in space. But the outfits began losing their invincibility almost as soon as they returned home.


The more than 270 space suits remaining from NASA’s Mercury, Gemini, and Apollo missions are fighting many problems: The salty, leftover sweat of overheated astronauts is corroding the suits’ aluminum components. Fungus is growing deep inside the outfits’ two dozen or so layers of nylon fabric. And many essential plastic and rubber parts are turning brown and brittle, says Lisa Young, a conservation scientist at the Smithsonian’s National Air & Space Museum (NASM), which hosts the world’s largest collection of U.S. space suits.


As these artifacts of cultural heritage inch toward their half-century birthdays, museum scientists are scrambling to find a way for the public to enjoy the suits for many moons to come.


A lot of the materials used to build space suits have inherent vices that make the artifacts prone to degradation. But the suits’ adventures in the years after their NASA missions were over have actually accelerated aging, Young says.


In the mid-1970s, after Apollo 17’s final voyage to the moon, NASA transferred ownership of the suits used during the lunar race to NASM. These moon suits include “our crown jewel,” the space suit worn by Neil Armstrong on the first lunar walk, says Cathleen S. Lewis, the NASM curator in charge of the space suits.


“But in many cases we didn’t have photographs or an opportunity to inspect the space suits in our collection for at least 20 years,” Lewis says, “because NASA had already sent some of these suits out on loan to other museums across the nation as part of an artifact-lending program. Everybody wanted a space suit to display.”


Many of these traveling space suits were exhibited in less than ideal circumstances such as direct sunlight or in humid, hot conditions, she adds. “People thought, ‘If they can survive the rigors of space flight, they can survive anything.’ Unfortunately, that’s not true.”


The space suits had been built with a cornucopia of materials—polyvinyl chloride, neoprene, nylon, Mylar, polycarbonate, and Teflon-coated fiberglass—that were launched in the 1950s and ’60s by chemical companies such as DuPont, BF Goodrich, and Owens Corning. The long-term viability of these then-new materials was not known—nor necessarily a priority for designers. Each $300,000, 65-lb suit was only expected to last a single mission that would take place over a week or so, Lewis explains.


And as the Americans raced against the Soviets to be the first to put a human on the moon, space suit designers faced tight deadlines. Typically, they had just six months or so to improve the astronauts’ uniforms between missions. There’s a “mythology” that new materials were created for the space program, Lewis says. But the truth is that designers co-opted materials launched primarily for household use—such as curtains, plastic appliances, or the like—for the space program, she explains. There simply was not enough time to develop new materials themselves.


One of the newly launched polymers incorporated into space suits was polyvinyl chloride. Used in the tubes that provided life support to the astronauts, PVC’s di­octyl phthalate plasticizer tends to leach to the surface of the tubing in much the same way that polycarbonate baby bottles leach their bisphenol A plasticizer into the contact liquid.


In the case of the space suits, the sticky, leaching phthalates crystallized on the surface of the PVC tubing and then began degrading into a brownish-orange compound that stained the white space suit exteriors. To avoid the discoloration, space suit conservators physically removed the PVC tubing from all the space suits and quarantined the tubing in storage.


Another problematic material in all the space suits is the rubber used in the so-called pressure bladders that sequestered the astronauts from the vacuum of space and kept their bodies at a livable air pressure, Young notes. Lasagne-noodle-shaped pieces of rubber combined with nylon were also placed in all the joints of a space suit to give astronauts better flexibility and motion. Unfortunately the rubber in all these components has lost its flexibility and become so brittle that the components can easily crack and deform.


The problem, Young says, is that the recipe used in the NASA space suits was a mix of natural latex rubber and synthetic neoprene rubber. Both kinds of rubber are sensitive to oxygen degradation, as well as to light, temperature, and mechanical weakening. “There were signs of degradation six months off the shelf,” she says. “But the rubber did work well enough to get the astronauts to the moon and back.” Nowadays space suit conservators monitor the rubber with CT scans. They also try to thwart damage by limiting handling and controlling environmental conditions around the garments.


Around 1971—two years after Armstrong and Buzz Aldrin took humanity’s first steps on the moon—space suit designers started incorporating a new antioxidant called Agerite White (N,Nʹ-dinaphthyl-p-phenylenediamine) into their rubber components to boost life span. These later suits have fared much better than their predecessors, Young says.


Another problem material found in many space suits, particularly from the older Mercury missions, is aluminum. In these garments, a coating of aluminum on the suit’s nylon surface is held in place by a rubber adhesive. As the suits have aged, the adhesive has broken down, and aluminum has begun to flake off. The search is on in NASM’s conservation lab, Young says, for “a clear coating that would not only encapsulate the flaking metal itself, but that would be also reversible if we needed to take it off.”


Aluminum-copper alloys used in space suit wrist connections are also suffering—this time from the effects of corrosion. Young and collaborators at the Canadian Conservation Institute, in Ottawa, Ontario, were surprised to find chloride in the problematic areas. The scientists initially wondered whether the chloride could have come from the swimming pools at NASA where some suits had gone through demanding underwater testing during development. “But the actual flight suits never were put in pools because they couldn’t do that sort of rigorous testing with something that was actually going to go into space,” Young says. 


Then the conservation team remembered that astronauts often told stories about “sweating buckets” in space suits, particularly in early missions before cooling undergarments had been invented, she says.


Given that sweat contains a high percentage of sodium chloride, the conservation scientists concluded that the chloride causing the corrosion was likely left over from astronaut sweat. The NASM conservation team is now in search of a salt-corrosion inhibitor and is looking for inspiration from scientists who help the Navy with its aircraft corrosion issues, Young says.


“People thought, ‘If they can survive the rigors of space flight, they can survive anything.’ Unfortunately, that’s not true.”

Space suits are also facing a variety of other physical, chemical, and biological adversaries as they age. Some space suits have collapsed on themselves, their fragile makeup no longer able to support their own heavy weight. To counter this, conservators store space suits horizontally on trays—similar to bodies in a morgue—and fill the outfits with polyethylene foam, polyester batting, and vinyl hose to keep them physically supported.


Another common space suit injury is the yellowing of the white Apollo suits from sustained exposure to ultraviolet light. Then there are the space suit zippers that refuse to open or close, handicapped by degradation of the zipper’s rubber components.


The space suits’ nylon and rubber interiors are also home to small populations of fungi that curators don’t want to fight with pesticides. It’s not a good idea to treat artifacts with procedures that are not easily reversed and with chemicals that may be harmful to scientists who handle the suits, Young explains. Most pesticides contain a lot of salt, which accelerates damage to other space suit components, she adds.


Across the range of space suit conservation studies, “we found that all of the problematic materials react better to a low humidity, below 35%. This stops everything: the plasticizers from leaching out to the metal corrosion continuing,” Young says. NASM curators have also established stricter regulations for display and are carefully interrogating other museums that want to borrow the space suits. “We’ve made a few enemies,” Lewis says.


And as part of a strategy to better safeguard the space suits, in June the entire space suit collection will be move from its current storage location in Suitland, Md., to new facilities at NASM’s Steven F. Udvar-Hazy Center in Chantilly, Va. There, curators will be able to better monitor humidity and undertake further conservation studies with state-of-the-art equipment. The hope is that the space suits themselves, which protected humans on our most dangerous voyages, will be better outfitted to withstand the reality of time.

Chemical & Engineering News
ISSN 0009-2347
Copyright © 2011 American Chemical Society
  • Print this article
  • Email the editor
Alan Shepard wore this aluminum-coated space suit when he went into space on Mercury's Freedom 7 mission in 1961. Mark Avino
Alan Shepard wore this aluminum-coated space suit when he went into space on Mercury's Freedom 7 mission in 1961.
Alan Shepard played golf on the moon in this suit during the Apollo 14 mission in 1971. Mark Avino
Alan Shepard played golf on the moon in this suit during the Apollo 14 mission in 1971.
Neil Armstrong wore this suit when he took humanity's first steps on the moon on July 20, 1969. Mark Avino
Neil Armstrong wore this suit when he took humanity's first steps on the moon on July 20, 1969.
Radiograph of space suit. Ron Cunningham & Mark Avino
Radiograph of space suit.
Radiograph of a spacesuit's glove. Ron Cunningham & Mark Avino
Radiograph of a spacesuit's glove.
Radiograph of 1964 spacesuit helmet. Ron Cunningham & Mark Avino
Radiograph of 1964 spacesuit helmet.
One of many prototype suits designed for the Apollo missions. Mark Avino
One of many prototype suits designed for the Apollo missions.
A test suit worn by Alan Shepard. Mark Avino
A test suit worn by Alan Shepard.
A prototype suit from the late 1950s. Mark Avino
A prototype suit from the late 1950s.
The suit worn by Alan Bean during the Apollo 14 mission, when he was the fourth man to walk on the moon. Mark Avino
The suit worn by Alan Bean during the Apollo 14 mission, when he was the fourth man to walk on the moon.
Chemical & Engineering News
ISSN 0009-2347
Copyright © 2011 American Chemical Society
  • Print this article
  • Email the editor

Services & Tools

ACS Resources

ACS is the leading employment source for recruiting scientific professionals. ACS Careers and C&EN Classifieds provide employers direct access to scientific talent both in print and online. Jobseekers | Employers

» Join ACS

Join more than 161,000 professionals in the chemical sciences world-wide, as a member of the American Chemical Society.
» Join Now!